local telecom call / fax diversion how to
I just copy and paste from local telecom user guide
so the steps are
1/ before I cut the wire,
dial 181 161 the number to divert to, or foward to , telecom call it divert
2/ dial 161 to activate
3/ dial 160 to cancel
4/ you must be at the premise to do that
5/ if not, you have to use remote divert, that mean you pay more
6/ I diverted serval numbers, I can;t seem to hear the confirmation tone as in the telecom guide.
7/ for the first phone number, a fax machine (not a tradional phone), ricoh MFC (hasn't got a handset), I paunched the sequence, it actually worked, it bit tricky to test, as incoming phone calls still showing up on the dash board (?). eventually I connected a traditional phone set to that line, yes, it was correctly diverted
8/ after diversion, you can still make out-going phone calls, but the dial-tone changed to one-long and one-short
Setting up Call Diversion
To programme each number you want your calls diverted
to:
•
Lift the handset and wait for the dial tone
•
Dial 181, followed by a code number between 161
and 169
•
Dial the number to which calls are to be diverted,
including area code if the number is outside your local
calling area (eg. 181 - 163 - 04 - 801 9000), then
press the # key
•
Wait for the confirmation tone (Dial Tone)
•
Hang up
(The code number is now registered against the number
to be diverted to. We recommend you keep a record of
these for future reference.)
Activating a Diversion
(from your own phone)
•
Lift the handset and wait for the dial tone
•
Dial the appropriate code (i.e. 161, 162 etc) for the
number you wish to divert to
•
Wait for confirmation tone
•
To confirm the correct diversion has been made wait
a little longer and a call will automatically go through
to the selected diversion number
•
Hang up
Cancelling Call Diversion
• Lift the handset and wait for confirmation tone
•
Dial 160
•
Wait for confirmation tone
•
Hang up
You can still make outgoing calls from your phone when
Call Divert is in use, but the dial tone is different (longshort-
long). This reminds you that incoming calls are still
being diverted.
Using Remote Divert • Lift the handset
